This is going to be fun

Just Wanna Chat? This is the place!
User avatar
charger528
Posts: 133
Joined: Wed Mar 05, 2014 9:27 pm
Location: Brockton Ma.

This is going to be fun

Postby charger528 » Sun Mar 22, 2015 6:24 pm

started to get a few things mocked up put the mid plate in boy its going to be tight no one said putting a BB Chrysler in a fox body would be easy but from what I can see it will fit dam thing going to look huge in this engine bay. also finish getting all the lettering off and my kids had some fun to. will need a truck oil pan there is only 12" from the pate to the cross member my engine uses a external pickup so I do not have to worry about a pick up tube. Next I will bolt up a stripped block in install the frt engine plate start getting everything lined up so I can weld the mounts for the plates.
Attachments
10956087_820262161379394_4019225179781624335_n.jpg
10956087_820262161379394_4019225179781624335_n.jpg (68.3 KiB) Viewed 260 times
10513357_820262608046016_1228797898720195737_n.jpg
10513357_820262608046016_1228797898720195737_n.jpg (79.02 KiB) Viewed 260 times
11073394_820262641379346_3738090433840055163_n.jpg
11073394_820262641379346_3738090433840055163_n.jpg (96.79 KiB) Viewed 260 times

T. Top Volare
Posts: 36
Joined: Mon Sep 09, 2013 11:20 pm

Re: This is going to be fun

Postby T. Top Volare » Sun Mar 22, 2015 7:44 pm

Why a ford ?

User avatar
charger528
Posts: 133
Joined: Wed Mar 05, 2014 9:27 pm
Location: Brockton Ma.

Re: This is going to be fun

Postby charger528 » Sun Mar 22, 2015 8:01 pm

its only a shell its heart is still mopar and @ 2500lbs with driver this things going to be a rocket. short answer because I can. its a race car its a sum of all its parts that make it go and very few of the fast cars are pure to their brand anyhow.

bear
Posts: 566
Joined: Tue Oct 08, 2013 8:24 pm

Re: This is going to be fun

Postby bear » Mon Mar 23, 2015 9:41 am

I think your going to need a very big shoehorn Will . :lol:

stroked340
Posts: 141
Joined: Mon Apr 29, 2013 5:59 pm

Re: This is going to be fun

Postby stroked340 » Mon Mar 23, 2015 3:54 pm

Man,your going to piss the Ford guys off :lol: :lol: :lol: :lol:

Whats in the engine your putting in it??

User avatar
charger528
Posts: 133
Joined: Wed Mar 05, 2014 9:27 pm
Location: Brockton Ma.

Re: This is going to be fun

Postby charger528 » Mon Mar 23, 2015 9:27 pm

440 with 528 440 source stroker kit should easily get me in the 10s as it is. In the 73 charger it was almost unsafe to drive on the street so in the light drag car it should be fun.
The tunnel ram looks cool but I will be running the 1090 king demon but I wouldn't put past me to try it to see how it compares
with a cam and heads swap 9s wouldn't be unreasonable
Attachments
29507940063_large.jpg
29507940063_large.jpg (75.89 KiB) Viewed 232 times
29507940064_large.jpg
29507940064_large.jpg (73.52 KiB) Viewed 232 times
29507940081_large.jpg
29507940081_large.jpg (84.71 KiB) Viewed 232 times

User avatar
charger528
Posts: 133
Joined: Wed Mar 05, 2014 9:27 pm
Location: Brockton Ma.

Re: This is going to be fun

Postby charger528 » Mon Mar 23, 2015 9:34 pm

Bear its crazy there is a lot of space but a lot of stuff in the way I'll figure it out but its def not going to be easy need a rear sump pan I was thinking truck pan.

bear
Posts: 566
Joined: Tue Oct 08, 2013 8:24 pm

Re: This is going to be fun

Postby bear » Mon Mar 23, 2015 11:05 pm

charger528 wrote:Bear its crazy there is a lot of space but a lot of stuff in the way I'll figure it out but its def not going to be easy need a rear sump pan I was thinking truck pan.

Well a big block truck pan is definitely a rear sump . If you need some measurements or pictures . I have my deep milodon pan on the shelf or if you can wait a couple of weeks , I'll be pulling my 440 out to do a lil tweaking and I can measure and take a few pictures of the 6 quart pan that's in it now . That's if that would help you out at all .

User avatar
charger528
Posts: 133
Joined: Wed Mar 05, 2014 9:27 pm
Location: Brockton Ma.

Re: This is going to be fun

Postby charger528 » Mon Mar 23, 2015 11:26 pm

a measurement from the rear rail to the frt of sump on the milodon would help I will need extra volume with the pump I'm using and a flat side to drill for a external pickup.

bear
Posts: 566
Joined: Tue Oct 08, 2013 8:24 pm

Re: This is going to be fun

Postby bear » Tue Mar 24, 2015 11:12 pm

IMG_3445.JPG
IMG_3445.JPG (240.7 KiB) Viewed 212 times
About an inch from the outside edge of the bolt hole to the back of the pan .


Return to “Shoot the Breeze”

Who is online

Users browsing this forum: No registered users and 1 guest